
Novastar VX1000 LED controller
The Novastar VX1000 is an LED controller for full-colour LED screens. Ideal for driving LED screens of every size. Supplied, installed and supported by PixelPLUS in Dubai, Abu Dhabi and Sharjah.
Key features
- NovaStar VX1000, an all-in-one controller with video processing and video control into one box. One VX1000 unit can drive up to 6.5 million pixels.
About the Novastar VX1000
NovaStar VX1000 is an all-in-one controller that integrates video processing and video control into one box. It features 10 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX1000 unit can drive up to 6.5 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels, respectively, which is ideal for ultra-wide and ultra-high LED screen applications.
The VX1000 is capable of receiving a variety of video signals and processing high-resolution 4K×1K@60Hz images. In addition, the device features stepless output scaling, low latency, 3D, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.
What’s more, the VX1000 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your in-field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.
Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.
Key Features
Input connectors
- 1x HDMI 1.4 (IN & LOOP)
- 1x HDMI 1.4
- 1x DVI (IN & LOOP)
- 1x DVI
- 1x 3G-SDI (IN & LOOP)
- 1x 10G optical fiber port (OPT1)
Output connectors
10x Gigabit Ethernet ports A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
2x Fiber outputs OPT 1 copies the output on 10 Ethernet ports. OPT 2 copies or backs up the output on 10 Ethernet ports.
- 1x HDMI 1.3 For monitoring or video output
Self-adaptive OPT 1 for either video input or sending card output Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
Audio input and output
- Audio input accompanied with HDMI input source
Audio output via a multifunction card
Output volume adjustment supported
Low latency Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.
- 3x layers
Adjustable layer size and position
Adjustable layer priority
Output synchronization An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
Powerful video processing
Based on SuperView III image quality processing technologies to provide stepless output scaling.
One-click full screen display
Free input cropping
Easy preset saving and loading
- Up to 10 user-defined presets supported
- Load a preset by simply pressing one button
Multiple kinds of hot backup
Backup between devices
Backup between Ethernet ports
Backup between input sources
Mosaic input source supported The mosaic source is composed of several input connectors of the same type.
- Up to 4 units cascaded for image mosaic
Three working modes
Video Controller
Fiber Converter
Bypass
All-round color adjustment Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
3D function Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
Pixel level brightness and chroma calibration Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.
Multiple operation modes Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.
Certifications
- CE, CB, UL, CMIM, EAC, FCC, IC, RCM, UKCA, NOM, KC
- NovaStar Video Controller Comparison
Questions about the Novastar VX1000
Which LED screens does the Novastar VX1000 work with?
It drives full-colour LED screens. PixelPLUS sets it up with the LED cabinets or modules you choose and configures the screen for you.
Where can I see the Novastar VX1000 in Dubai?
Visit the PixelPLUS showroom at 24/26 Wilson Building, 2nd December Street, Opposite World Trade Center, Dubai, open Monday to Friday 9:00–18:30 and Saturday 9:00–14:00. Message us on WhatsApp first to check which models are on display.
How do I get a price for the Novastar VX1000?
Send your screen size or quantity on WhatsApp (+971 50 451 9226) and PixelPLUS will reply with a quote.
Similar products
All led controllers & players →Get a quote for the Novastar VX1000
Tell us your screen size or quantity on WhatsApp — or visit our Dubai showroom to see it in person.



